Stadium Lights

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

Installation Steps:

1. Turn off game, remove glass and pinballs. Lift playfield on to service rails. With the wire harness on the left, attach the LED strip to the underside of the back box, aligning each strip above the stadium light artwork on the back board. 
   
   
   
2. Lift the playfield and find the molex that attaches to the small yellow dome flasher on the left ramp above the lock. Disconnect the molex and attach the mod to either end of the molex as shown.
   
      
3. Utilize zip ties to dress wire as desired to existing wire harnesses.
4. Installation is complete!
   
   

 Copyright Mezel Mods, 2017. All rights reserved. Because stealing is wrong and mean.