SW - Switch Cover Toy Bracket

These instructions are applicable to the following products:

• MM-SW-TOY-SWITCH

WHATS IN THE BOX

1. Star Wars Switch Cover Toy Bracket
   

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

This bracket is made for use with the Hot Wheels® Star Wars® Starship toys.

Installation Steps:

1. Turn off game, remove glass.
2. Remove nut from the top of the one-way gate in the back of game near the backboard.
   
3. Attach your toy of choice to the bracket using super glue or similar adhesive.
4. Slide bracket on top of the one-way gate and reattach the nut.
5. Installation is complete!

Copyright Mezel Mods- 2017. All rights reserved. Because stealing is wrong and mean.