Mystery Hole Installation

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

NOTE: This product requires the replacement of one of your GI bulbs with a frosted white dome bulb.  If you prefer not to utilize the replacement bulb, a set of alligator clips can be utilized instead. Please note that alligator clips are not intended for permanent connections and can come loose potentially causing shorts.

 Installation Steps:

1. Remove glass, balls and lift playfield. Ensure game is turned off.
   
   
2. Attach the LED to the scoop mechanism as shown. Align the 'Ground' plate on the LED board with the weld in the center of the scoop for best visibility.
   
   
3. Remove one of the Mystery insert LEDs and replace with the LED plus connector provided with the mod. To remove the LED push the bayonet down while twisting. Attach the connector on the LED to the Mystery Hole. Please note: the alligator clips and green LED shown in this photo are not part of the product installation nor of the stock game assembly.
   
4. To test the product functionality, run your games Diagnostics and cycle to the Mystery Flasher. Ensure both LEDs illuminate on this test.
   
   The mystery hole....not a mystery to install!

Copyright Mezel Mods- 2017. All rights reserved. Because stealing is wrong and mean.