AC/DC - Bell Mod (all versions) – Mezel Mods

These instructions are applicable to the following products:

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.

Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.

Images included in these instructions are of an installed prototype and may vary from your product slightly.

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

Installation Steps:

Remove the playfield glass. Remove the backing from the double sided tape on the inside of the part.
Drop the bell mod onto the aluminum plate or block above the bell. The Pro version slides on (a very tight fit) over the metal plate. The Premium LE version slides on top of the block.
Make sure to check clearance by gently swinging the bell to ensure the opto board does not hit the mod. To fix, loosen the screws on the opto board and try adjusting it slightly.

Related articles