DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
Installation Steps:
- Remove balls and lift playfield
- Find screws under fuel target bank and unscrew. Utilize these screws to attach the LED bracket as shown. Note: Premium version is shown here. Pro version LEDs are oriented slightly different due to the bracket required for this version.
- Find the two slingshot spotlights on the underside of the playfield. Trace the wire from the slingshots to the 2-pin IDC connectors. Unplug the two 2-pin IDC connectors and plug in the harness as shown.
- Lower the playfield, replace balls and turn on power. Easy as that- so easy a caveman could do it!
Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.
Comments
0 comments
Please sign in to leave a comment.