DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
- On the under side of the playfield, loosen the two ramp screws directly to the left of the bazaar hole. Fully remove the top screw and post; leave the bottom screw loose but still connected to post.
- Slide top screw through hole in the Mezelmods Bazaar Hole LED (see photo).
- Reattach screw with bracket, sliding it through ramp hole and into post. Tighten ramp both screws. The LED will now be positioned directly under the Bazaar hole.
- Attach alligator clips to bazaar flasher. Installation is now complete!
Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.