Idol Installation

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood. 

Installation Steps:

1. Loosen the top two plastics and the middle standoff between them in order to route the wiring.
   
   
2. Place idol on plastic using Velcro (provided) as far left as possible on the top plastic. Proper placement is critical to avoid ball hitting the Idol while coming down the ramp.  
   
   
3. Feed the wiring around spacer on backside of plastic and down through the top plastic, then through the playfield as shown. It's a little bit tight to get the cable down through the plastics and playfield.
   
   
   
   
   
   
4. Connect Idol to flasher as shown. Lower the playfield- installation is now complete!
   
   

Copyright Mezel Mods- 2016. All rights reserved.