The City Installation

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

Installation Steps: 

1. Hang the city over the existing City decal on the backboard and adjust location as preferred. 
2. With City still on backboard, note where U bracket should be attached. The U bracket slides into the green bracket on the back of the City to keep it in place. Make sure to position the U bracket so that it will allow the green bracket from the city to slide inside.
3. Attach the U bracket on the back of the backboard, directly behind the green bracket on the City using the tape provided.

Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.