DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
NOTE: POWER TAP NOT COMPATIBLE WITH MOST UNDER CABINET LIGHTING KITS
- Unplug the factory wiring found on CN7 (the 48V DC Input) in the backbox.
- Plug the first IDC connector included with the power adapter with the black wire on the far left. Plug the factory wiring (unplugged in step 1) into the second IDC connector (with the z connector) on the power adapter.
- Attach the tap to the existing screw (as shown in photo)
- Utilize the molex connectors to plug and play additional accessories. Each are labeled with the power sources- 5v or 12v.
Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.