Plastic Protectors and Slingshot Mashers

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

Remove protective coating on both sides of plastic. This coating can be clear/blue plastic or brown paper adhesive.

All Plastic Protectors are installed under game plastics using existing hardware. Plastics frequently come with a protective coating which should be removed prior to installation.

Use a socket wrench to remove the hardware. Factory washers may need to be removed from under existing factory nuts and screws  in order to ensure fit.  Some plastics require removal of spotlights or other hardware.

In all cases the metal factory protectors found on the slingshot pieces (rectangular shape) that ship with all new Stern games must be removed prior to installation. The plastic protector or masher replaces this piece.

For slingshot mashers, place one round protector on top of existing posts and reattach hardware.

For plastic protectors, over the top of slingshot and reattach hardware. Nudge plastics to ensure alignment.

Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.