DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
- Remove playfield glass and balls.
- Lift playfield and locate board below the fuel target bank. Carefully slide large gel under edge of board ensuring the four F-U-E-L inserts are fully covered.
- Locate the fuel gauge inserts and slide the small gels carefully under reach LED board being sure to cover the insert. You may need to loosen the LED board slightly to slide the gel under the boards. Note- the fuel gauge gels are not compatible with the newer Metallica version with inset LEDs.
- Lower the playfield and replace balls. Installation is complete.
Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.