PULP - Pawn Shop

These instructions are applicable to the following products:

• MM-PULP-PAWN

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Turn off game. Remove glass from playfield.
2. Remove the 2 small screws to free the OEM Pawn Shop acrylic.
3. With the front facing sign removed, we'll now free the top piece of plastic (textured black piece). Using a 5/16 wrench and Philips head screwdriver release the textured plastic piece. Repeat on both sides. Put the nuts off to the side, we will need these again (Step 7). Place spacers and screws in a bag. We won't need them for the rest of this install.
4. With the top plastic removed, the spotlights are also freed.
5. Remove the tape backing on the rear of the provided Pawn Shop. Place the Pawn Shop over the original bracket, using the tape to secure in place. Install spotlights into slots on the top of the mod.
6. Gently pull on the wiring for the spotlights and LED attached to black top surface. Slide the top piece into the mod, aligning with screw holes. Observe how the wires on the right side are oriented.
7. This step can be tricky as the spotlights sometimes don't want to stay in place. A touch of scotch tape over them can help hold them in place. Place roof piece over mod and insert provided screws. Use the nuts from Step 3 to secure in place. Ensure you aren't pinching any wires. Do not over tighten. Tighten just enough so the screw heads are down on the roof and the nuts are up against the bracket.
8. Finished! Enjoy your new Pawn Shop! Don't let the gimp out!