Jaws - O2 Tank

These instructions are applicable to the following products:

• MM-JAWS-O2TANK

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory, or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Remove the brown tape backing
2. Place the tank in your preferred orientation in the shark's mouth, for LE/PREM owners please keep the tank as centered as possible. To get to the shark out: power your machine on, then wait for the shark to emerge, power your machine off, and hold the shark in place while you press the tape on
3. Press and hold the tank and tape for 10 seconds