DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
Installation Steps:
- Turn off the power, remove the glass and balls from the game.
- Using a screwdriver and wrench, remove the dome cover you wish to replace. Removing the screws holding down the acrylic may make this easier. Be aware of the configuration of the screw, washer, and nut.
- Using the black Star Lord mount, replace the screws, washer, and nut in the same order they came off. When tightening the screw with the LED board on it, be aware that the LED board may begin to rotate as you tighten the screw. Ensure the LED is roughly in the middle of the hole on the black mount.
- Gently insert the Star Lord bust into the mount. If you push down too hard you may break the mount or the LED board. Rotate the Star Lord bust to the direction you wish. NOTE: Excessive repositioning will reduce it's ability to stay where you put it.
Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean
Comments
0 comments
Please sign in to leave a comment.