DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
- We will be connecting the scoops to spotlight connections. The connection we will be utilizing is roughly in the center of the playfield. It can be identified by a 2pin molex connection with black and blue on the north side and yellow and yellow with green stripes on the south side. Separate that connection and add our molex jump into it.
- You may power on your game for a moment to identify the LED's colors. Once the blue and green have been identified, the blue will go under "The Depths" scoop and green will go into the "Bayou" scoop.
Here is the placement for the blue LED - "The Depths":
The head on the LED is adjustable just not too many times. The LED should be facing the clear acrylic that is part of the scoop.
Here is the placement for the green LED - "Bayou":
Be sure the the head of the LED is between the lane under the playfield and the arrow insert. Again, the head is slightly adjustable, just not too many times.
- Lower playfield- installation is complete