Doggie Din-Din

These instructions are applicable to the following products:

• MM-MUN-DOGGIE-DINDIN

______________________________________________

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Decide which flashing dome you would like to place Doggie Din-Din on. The color of the dome will determine the color flashing thru the dog can.

2. The black standoff has 2 sides. One is a continuous circle the other is broken up. The "broken up" side is the bottom. Remove the backing from the tape and position the "holes" over the screws surrounding the selected dome flasher. 

3. Peel off the backing on the underside of the can. Position the wording on the can to face the player. Firmly press the can down on the standoff.