Attack from Mars Remake Trough Installation

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Turn off game, remove glass and lift playfield on to service rails. 
2. Attach LED pad light on inside of top left in trough using adhesive backing provided.
   
   
3. Run the wiring through the backside of the apron on and under the playfield. 
   
   
4. Lift playfield fully and locate a GI bulb. The circled connection is recommended but any GI bulb can be utilized.
   
5. Utilize a small screw driver to press on the black tab to the left of the connector and remove the connector by pulling straight out.
   
6. Plug one of trough wiring connectors into this connection (as shown) and connect the unplugged GI wiring from the game into the second connector. 
   
7. Turn on the game to test LED. Installation is complete!

1. Copyright Mezel Mods- 2018. All rights reserved. Because stealing is wrong and mean.