Moonshine Flasher Replacement

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

Installation Steps: 

1. Remove the factory flasher dome by pressing in a downward-force perpendicular to the top surface while twisting anticlockwise for roughly 90 degrees. 
   
   
2. Obtain the Moonshine Flasher Replacement and install by fitting "legs" in the indicated slots on the plastic (as shown).
   
   
   
   
3. Apply the same downward pressure to the Moonshine Flasher Replacement and twist clockwise for approximately 90° (1/4 revolution)   

TIP: If you cannot install the Moonshine Flasher Replacement, utilize the two (2) opposing thru-holes by slipping rod, Outside Diameter less than 0.070" (approx. 1/16"), and carefully rotating clockwise for roughly 90 degrees.