These instructions are applicable to the following products:
WHAT'S IN THE BOX
|
DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall them by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
- Remove playfield glass and pinballs, placing both in a safe location.
- Lift playfield on to service rails and locate the scoop mechanism (shown in photo below).
- Attach the LED mounted on the L shaped bracket (part 1) to the outside of the scoop mechanism, using the mounting adhesive (part 3). Allow the remaining wiring to extend toward the back of the playfield.
- Lower the playfield back on to the service rails then reach in behind the backboard to reach the wiring from the last step.
- Take the remaining LED (part 2) and utilize the adhesive to mount it facing toward the ramp opening [PHOTO MISSING].
- Once attached, run the connection (part 4) to the Spooky Power Adapter (NOT INCLUDED) and attach to one of the four molex connections on the board
Comments
0 comments
Please sign in to leave a comment.