Vendor's Website(External Link)
Other Playfield Products
Toppers are available with our without illumination. See relevant installation instruction information below.
Installation instructions for toppers are included with your shipment. Installation questions can be directed to Sparky Pinball
Use these installation instructions for Topper Illumination Kits
Back to top
Video Displays ship with the video pre-loaded. All other Sparky Pinball playfield products ship with installation instructions included. Installation questions can be directed to Sparky Pinball
All Video Display Mods require a 5v power supply. You can access the 5v supply from the game's driver board by using a the Power Adapter/connector included for WPC/WPC95, Spooky, Spike and DE) or another suitable auxiliary power tap or supply (DK Pinball Power Tap, Pinball Life Power Board, PinHeck, etc).
If you are using an alternative, please ensure it provides access to both 5v and 12v power. If you're already using a Power Tap for another mod, you can also use a splitter
on the Power Tap to run the video display with the other mod.
Other power options to access 5v from places other than the game's driver board are external power supplies or wall wart adapters, but be aware that the display requires 5v.
For Stern/SAM system games, the 5v/12v auxiliary connection near the coin door can be utilized to power the Video Display. You can use a splitter
at this connection to power multiple mods, as well.
All other Sparky Pinball playfield products ship with installation instructions included. Installation questions can be directed to Sparky Pinball
Back to top