DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
1. Turn off game and unplug machine. Remove Playfield glass and balls.
2. Unscrew original Pop Bumper acrylics, making sure to save the original screws.
3. Place screws into holes of clear acrylic provided with Pop Bumpers.
4. Align clear acrylic and screws with holes. Screw back into place, alternating from side to side to ensure acrylic is level.
5. Repeat previous steps with other 2 Bumpers.
6. Gently snap Pop Bumpers onto clear acrylics. Bumpers should fit snugly and do not require glue or tape.
Comments
0 comments
Please sign in to leave a comment.