DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
- Remove the screw to the right side of the Vertical Up Kick (VUK) which can be found near node board 9A.
- Place bracket on screw so that LED faces toward bottom of the playfield. Reattach screw.
- Find the right dome flasher wire and disconnect the IDC. Connect the IDC from the mod into the machine ensuring that red wire from game connects into red wire on mod all the way through the connection.
- Installation is complete!
Copyright Mezel Mods- 2016. All rights reserved. Because stealing is wrong and mean.