SWT - X-Wing Illumination

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Turn off game power, remove the glass and pinballs.
2. Lift the playfield into an upgright position and locate the wiring for the lower right spotlight.
   
3. Unplug the spotlights 2-pin connector and plug in the LED wiring harness, attaching the two connections to the playfield connections.
   
4. Run the wiring for the LED up the right underside of the playfield, under the shooter lane. 
5. Lower the playfield slightly and attach the LED under the X-Wing plastic as shown.
   
6. Turn on the games power to test LED functionality. Installation is complete!