JP - Dilophosaurus - Pino

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

Etape 1 : Ouvrez votre flipper et déposez sa vitre. A l’aide d’un tournevis, dévissez la vis suivante afin de maintenir la tête du Dilophosaure.

Step 1: Open your pinball machine and put down its window. Using a screwdriver, unscrew the following screw to hold the head of the Dilophosaurus.

Etape 2 : Soulevez votre plateau pour avoir accéder à l’ampoule que vous allez remplacer. Dévissez la vis pointée par la flèche blanche sur la photo.

Step 2: Lift up your tray to access the bulb you are going to replace. Unscrew the screw pointed by the white arrow in the photo.

Etape 3 : Une fois le support de l’ampoule démonté, placez l’ampoule spéciale fournie avec le kit afin de permettre une connection supplémentaire en 5v et revissez le support de l’ampoule sur le plateau

Step 3: Once the bulb holder has been removed, place the special bulb supplied with the kit to allow an additional 5v connection and screw the bulb holder back onto the tray

Etape 4 : Remettez votre plateau en place. Et placez dans la bouche du Dilophosaure le kit des fibres optiques fournies.

Step 4: Put your tray back in place. And place the supplied optical fiber kit in the mouth of the Dilophosaurus.