BSD - Torches

These instructions are applicable to the following products:

• MM-BSD-TORCH-SOLID-FLICK

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Remove the rubber sleeves on the factory bulbs
2. Remove the factory bulbs (push inward and twist to remove)
3. Replace bulbs with those provided with your product. Please note, some users have reported issues with the flickering bulbs not working appropriately in their game. In this case the solid color bulbs can be utilized.
4. Attach the torches on top of the bulb openings using the adhesive provided. Press down firmly to activate the adhesive.