Alien - Pinball Brothers Power Adapter

These instructions are applicable to the following products:

• MM-POWER-ALIEN
• MM-POWER-ALIEN-KIT

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall them by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

Install:

1. Remove the playfield glass and lift the playfield onto service rails.
2. Locate the 10-position connection under the LCD screen in the backbox. Please note, that you do not need to remove the translite to locate/install the power adapter. NOTE for LV owners: there will be a wiring harness plugged into this location. Unplug the wiring for the cabinet blades found in this location. 
   
3. Attach the female end of 10-position connector into the plug side on the game; clip side properly oriented. The male end of the wiring harness will not be in use for SV owners. For LV owners, plug the side blade wiring (unplugged in the previous step) into the the sister (male) connector to power the side blade wiring. 
   
4. Install products on the power adapter or power adapter kit using the following connections
   
   POWER ADAPTER ONLY 
   NOTE: CURRENT VERSION OF POWER ADAPTER HAS TWO 10-PIN CONNECTORS, PHOTO NOT CURRENTLY ACCURATE
   POWER ADAPTER KIT