These instructions are applicable to the following products:
DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory, or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall them by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
1. Prep
1-You will need your new Mine Sign and a thin or long screwdriver, highly recommend a mag-tip(magnetic screwdriver).
2- Power on Cactus Canyon and then open the coin door and press the test/enter button, scroll down the menu and select "Tests", scroll down again and select "Mine Test", now press test/enter to cycle the cave/mine until it's all the way up, now you can power off Cactus Canyon.
2. Remove the original sign
1- Lift the cave up to reveal the bolt at the bottom
2- Unscrew the bolt (be careful not to drop the bolt in the hole) and put it in a safe place (You will need the bolt later to install the new sign).
3- Lift the sign up and away from the cave to remove the sign off the hook.
3. Install new Mine Sign
The next steps are the same as the previous instructions but in reverse.
1- Align the hole on the back of the new sign with the hook
2- Once the sign is hooked on, hold the cave still/up and push the sign down
3- Screw in the bolt you saved before and enjoy your new Mine Sign
Comments
0 comments
Please sign in to leave a comment.