These instructions are applicable to the following products:
DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory, or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall them by turning them counter-clockwise to match the original groove to respect the integrity of the playfield wood.
The tape is plan B for this mod, it should only be used if the tolerance of the metal bracket behind the mine entrance is off. If our clips don't fit in your game, snip them off and use the tape to attach the mod. Otherwise the tape and tape covers should be left on.
The clips (Circled below) should fit into the metal bracket (Dashed Rectangles below) located behind the mine entrance.
The feet on the mod need to face the front of the playfield.
To install the gold there's a small arrow on the bottom that points to the front of the playfield (our recommendation).
The tape on the gold is optional, this allows for even more customization by giving you the option to place something else in the cart.