FF - Area 51 PRO

These instructions are applicable to the following products:

• MM-FF-AREDA51-PRO

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

1. Turn off game and remove glass from playfield.
2. Pull out playfield on to service rails. To protect cabinet sides we recommend using our cabinet assembly protectors.
3. Unplug pictured flasher from the cabinet.
   1. Unscrew the three circled screws. Set two aside for step #5 . Remove factory acrylic in a safe place.  
4. Feed Mod wire through cutout. Plug into game.
5. Place base onto factory posts. Use two screws to screw base onto posts.
6. Peel backing off of sookwang.
7. Slide front of building onto base, starting from the left. Hold for 20 seconds to ensure adhesion.
8. Unscrew screw from post on right. Do not remove washer.
9. Place fence onto post and screw into place.
10. Finished!