Current Mods:
James Bond 007 - Roulette Wheel
Godzilla - Walking Godzilla
This board is used in serval mods and the instructions for those mods will go into more specifics, this article will only go over the generic information that will be cited in the specific mod instructions.
Game Modes:
The Switch is located in the top right
Position | Mode |
0 (left) | Game |
1 (right) | Timer/Random |
Reset / Change Game Modes:
Move the Switch into the desired mode, press the reset button, or power down the pinball machine to power it back on.
Resets are a good troubleshooting step as well if the mod is not functioning properly a quick reset is a great first step.
The reset button is located at the center close to the top, identified with this symbol:
Potentiometer / Change the light-sensitive:
The Potentiometer is located in the top left
The Potentiometer is using the section to allow you to pick 4 different settings
Position |
Environment Light Levels |
Section 1 (white / 0-25) | Best for very dark room |
Section 2 (black / 25-50) | Average lit room (Recommended) |
Section 3 (light grey 50/75) | Bright room |
Section 4 (dark grey 75/100) | Very bright room |
If the Stay Puft is set to game mode but goes off at random times, try setting the potentiometer to a lower position (1 or 2). The light sensor might be getting too much light, giving it a false positive.
Comments
0 comments
Please sign in to leave a comment.