DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
Please remove the protective film on both sides before mounting. Protective film can be left on bottom side for games in high-use environments.
Lift the playfield on to the service rails- for some games, the apron must be removed to complete installation. Place the protector in the shooter lane. Carefully attach the adhesive square with 1/2 on the protector, the other on the playfield.
Note: for games without a metal ball guard, a plastic piece is included to protect the wooden rails. Please loosen the two screws of the level (installed at the factory), place the angle under the level, and replace the two screws.
Test the functionality of the shooter lane switch to ensure adjustment is not required. Utilize the following video as a guide if your shooter switch requires adjustment.