These instructions are applicable to the following products:
- MM-KONG-PLASTICS-YEL
- MM-KONG-PLASTICS-CLR
- WHATS IN THE BOX
|


DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts.
Please follow these safety instructions as well as all installation instructions. Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation.
Images included in these instructions are of an installed prototype and may vary from your product slightly.
If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.
When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.
Please note that this page is still under construction and will be completed soon.
Install difficulty: Easy
Tools needed: 1/4 nutdriver/wrench, 5/16 nutdriver/wrench, Flat head screwdriver, Philips head screwdriver.
- Turn off game. Remove glass from game and set in a safe and secure location.
- To be honest, this is a set that we feel doesn’t really need images for. If those who install the plastic protectors disagree, then let us know at support@mezelmods.com and we will update this article to include some images. There are, however, two things to note.
- In order to get the plastic protectors on, you will need to unscrew everything off of the Stern plastic and then reattach them with our plastic protector on.
- The second is that from the spotlights, you don’t need the black washer that is on the topside of the spotlight. You can just reattach the spotlights without that, along with the washers that are on the Stern plastics.
- When we tested the plastic protectors, no additional hardware was needed. If you cannot get the plastic protectors on with the original hardware, then email support@mezelmods.com.
Comments
0 comments
Please sign in to leave a comment.