Kong - Shackles

These instructions are applicable to the following products:

• MM-KONG-CHAINS

DANGER ELECTRICAL SHOCK
Pinball machines have high voltages which can cause DANGER TO LIFE AND LIMB. TURN POWER OFF and UNPLUG PINBALL MACHINE prior to installation. Pinball machines are high voltage and can cause electrical shock.
SAFETY GLASSES are also recommended while working with or installing pinball parts. 

Please follow these safety instructions as well as all installation instructions.  Failure to follow these instructions may result in damage to the pinball machine, accessory or other parts. Please see our Disclaimer for associated risks and responsibilities (Section 13 in our Terms of Service) prior to installation. 

Images included in these instructions are of an installed prototype and may vary from your product slightly. 

If you have questions or concerns regarding the proper installation of this part, please contact us for assistance.

When removing screws from the playfield, reinstall by first turning them counter-clockwise to match the original groove in order to respect the integrity of the playfield wood.

What's in the bag:

Shackle small 3M tape

1. Cut tape in half. Apply to one side of shackle.
2. Choose which arm to apply. We recommend Kong's right arm as it has better visibility. The left arm tends to be obscured by the arc ramp. Wrap shackles around Kong's wrist and press closed for a few seconds to activate tape.